AXIS P33 Network Camera Series Installation Guide Page 9
ENGLISH
Assign an IP address
The network camera is designed for use on an Ethernet network and requires an IP address for
access. Most networks today have a DHCP server that automatically assigns IP addresses to
connected devices. If your network does not have a DHCP server, the network camera will use
192.168.0.90 as the default IP address.
AXIS IP Utility and AXIS Camera Management are the recommended methods for setting an IP
address in Windows. These free applications are available on the Axis Network Video Product CD
supplied with this product, or they can be downloaded from www.axis.com/techsup Depending on
the number of cameras you wish to install, use the method that suits you best.
Notes:
• If you are unable to set the IP address, check for any firewall blocking the operation.
• See page 16 for other available methods for setting or discovering the IP address of the network camera,
in relation to other operating systems.
Method Recommended for Operating system
AXIS IP Utility
See page 10
Single camera
Small installations
Windows
AXIS Camera Management
See page 11
Multiple cameras
Large installations
Installation on a different subnet
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista
Window 7
To Next Page
Loading...
Need help?
General
