Need help?Do you have a question about the Axis P8221 and is the answer not in the manual?
General| Relay Outputs | 2 |
|---|---|
| Digital Inputs | 4 |
| Enclosure | Plastic |
| Audio Output | Terminal block for one balanced audio output |
| Power over Ethernet | Yes |
| Connectors | Terminal block |
| Power | PoE (IEEE 802.3af) |
| Protocols | HTTP, HTTPS, SSL/TLS, IPv4, IPv6, Bonjour, UPnP, QoS, SNMP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, DNS |
| Network Interface | 10/100 Mbit/s Ethernet |
| Output channels | 2 |
| Input type | Digital, audio |
| Maximum load voltage per output | 30 V DC |
| Operating Temperature | -10 °C to 50 °C (14 °F to 122 °F) |
| Dimensions (alternative) | 4.3 x 2.9 x 1.4 in |
| Weight (alternative) | 0.3 lb |
Instructions on how to access and interact with the AXIS P8221 via a web browser.
Step-by-step guide for setting the initial administrator password for secure access.
Details audio equipment connections and adjusting input gain for microphones on Audio 2.
Configuring audio modes, input sources, microphone power, and sample rates.
Details the eight configurable input/output ports for connecting external devices.
Setting up event servers for notifications and defining event types for actions.
Configuring user access, IP filtering, HTTPS encryption, and certificates for device security.
Configuring IP version 4 and IP version 6 addresses, DHCP, static IP, and DNS.
Steps to reset the unit to original factory default settings using the control button.
Details on the various connectors for serial communication, audio, and networking.
Troubleshooting firmware-related issues, including upgrade procedures and recovery methods.
To Next Page
