Axis P8221 - Alternative Methods of Accessing Audio

To Next Page

To Previous Page

AXIS P8221 - Audio Streams

Alternative methods of accessing audio

QuickTime and Windows Media Player

Simplex audio can be accessed via QuickTime and Windows Media Player by using the paths below. QuickTime supports G.711

and AAC audio encoding.

• Windows Media Player. This requires AXIS Media Control to be installed. The paths that can be used are listed below in

the order of preference:

• Unicast via RTP: axrtpu://<ip>/axis-media/media.amp

• Unicast via RTSP: axrtsp://<ip>/axis-media/media.amp

• Unicast via RTSP, tunneled via HTTP: axrtsphttp://<ip>/axis-media/media.amp

• Multicast: axrtpm://<ip>/axis-media/media.amp

• To access audio from QuickTime™ the following paths can be used:

• rtsp://<ip>/axis-media/media.amp

• rtsp://<ip>/axis-media/media.3gp

Notes:

• AXIS P8221 supports QuickTime 6.5.1 and later.

• QuickTime adds latency to the audio stream (up to 3 seconds).

• It may be possible to use other players, although Axis does not guarantee this.

• <ip> = IP address

VAPIX®

Audio streamed via RTP/RTSP can be accessed through the VAPIX® application programming interface (API). For more

information visit http://www.axis.com/techsup

Other manuals for Axis P8221