Axis Q1635 - Reset to Factory Default Settings; Further Information

AXISQ1635NetworkCamera
Note
•IfyouselectaDCiriscongurationleforaP-irislens,anerrormessagewillappear
belowtheiriscongurationtypeintheCameraSettingspage.ForcustomDCIrislenses,
selectGenericDCIrisoption.
•Thereisnoneedtorestarttheproductafterchangingthelens.However,theproductmust
berestartedifyouareinterchangingbetweenaP-iris,DC-Irisorxed/manualirislens.In
ordertosetthefocusandpositionthelens,theproductmustbeconnectedtothenetwork.
ResettoFactoryDefaultSettings
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultwillreset
allsettings,includingtheIPaddress,tothefactorydefaultvalues.
Note
TheinstallationandmanagementsoftwaretoolsareavailableontheCDsuppliedwiththe
productandfromthesupportpagesonwww.axis.com/techsup
Toresettheproducttothefactorydefaultsettings:
1.Disconnectpowerfromtheproduct.
2.Pressandholdthecontrolbuttonandreconnectpower.SeeHardwareOverviewon
page10.
3.Keepthecontrolbuttonpressedforabout15–30secondsuntilthestatusLEDindicator
ashesamber.
4.Releasethecontrolbutton.TheprocessiscompletewhenthestatusLEDindicatorturns
green.Theproducthasbeenresettothefactorydefaultsettings.IfnoDHCPserveris
availableonthenetwork,thedefaultIPaddressis192.168.0.90
5.Usingtheinstallationandmanagementsoftwaretools,assignanIPaddress,setthe
password,andaccessthevideostream.
6.Refocustheproduct.
Itisalsopossibletoresetparameterstofactorydefaultviathewebinterface.GotoSetup
>SystemOptions>Maintenance.
FurtherInformation
TheUserManualisavailableatwww.axis.com
Visitwww.axis.com/techsuptocheckifthereisupdatedrmwareavailableforyournetwork
product.Toseethecurrentlyinstalledrmwareversion,gotoSetup>About.
22