Need help?Do you have a question about the Axis Q1942-E and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Certification | EN 55022 Class A, EN 50121-4, IEC 62236-4, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR22 Class A KCC KN32 Class A, KN35 IEC/EN/UL 60950-1, IEC/EN/UL 60950-22 EN 50581, IEC 60529 IP66/IP67, NEMA 250 Type 4X, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6 Class 4M4, IEC 60068-2-27, IEC 60068-2-52, IEC 60721-3-4 Class 4K3 |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, POR, RUS |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Bundled software | VAPIX AXIS Camera Application Platform AVHS AXIS CameraCompanion, AXIS CameraStation |
| Number of cameras | 1 |
| Mounting brackets included | Yes |
| USB port | No |
| Interface | RJ-45 |
| Audio system | 2-way |
| Voice codecs | G.711, G.726 |
| Audio formats supported | ADPCM, LC-AAC, PCM |
| Form factor | Bullet |
| Mounting type | Ceiling/wall |
| Product color | White |
| Housing material | Aluminum |
| International Protection (IP) code | IP67 |
| AC input voltage | 20-24 V |
| Power source type | PoE |
| Power consumption (Power over Ethernet (PoE)) | 4.8 W |
| Maximum resolution | 640 x 480 pixels |
| Image quality adjustment | Brightness, Contrast, Sharpness |
| Video compression formats | H.264, M-JPEG |
| Minimum illumination | - lx |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -40 - 60 °C |
| Operating relative humidity (H-H) | 10 - 100 % |
| Fixed focal length | 60 mm |
| Security algorithms | 802.1x RADIUS, HTTPS, SSH, SSL/TLS |
| Alert notification type | |
| Password protection type | User |
| Flash memory | 256 MB |
| Internal memory | 512 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Power source | PoE, DC, AC |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP TM , SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH |
| Sensor type | Microbolometer |
Weight and Dimensions| Length | 344 mm |
|---|---|
| Weight | 2200 g |
| Diameter | 146 mm |
Product compliance with safety standards, grounding, and power supply requirements.
Steps for browser access, root password setup, and internet connectivity configuration.
Overview of live view controls, stream profiles, palettes, trigger, snapshot, and heater.
Details on manual trigger, AMC toolbar, PTZ modes, and using pan/tilt bars for camera steering.
Shortcuts to essential settings: Users, TCP/IP, Date & Time, Video Stream.
Details on H.264 profiles, GOP length, bitrate control (VBR, MBR), and frame rate.
Explanation and use of Zipstream for efficient video streaming and storage.
Configuring action rules with triggers, conditions, actions, recipients, and schedules.
Managing user accounts, ONVIF, IP filtering, and HTTPS for secure product access.
Implementing IEEE 802.1X for network access and managing digital certificates.
Configuring date, time, NTP synchronization, and basic network parameters.
Configuring IPv4, IPv6, DHCP, static IP, and ARP/Ping for network access.
Settings for AVHS, DNS, NTP, HTTP/HTTPS, NAT traversal, and protocols like FTP, RTSP, SOCKS, QoS, SNMP, UPnP, RTP, Bonjour.
Procedures for resetting the product to factory default settings via hardware or web interface.
Factors affecting performance like resolution, compression, bandwidth, and client load.
To Next Page
