Axis Q9216-SLV - Set up Rules for Events

AXISQ9216-SLVNetworkCamera
Configureyourdevice
1.ConnectanexternalmonitorusingtheHDMIconnector.
2.GotoSystem>VideooutandturnonHDMI.
3.SelectaSource.Rotatetheimageifneeded.
Setupnetworkstorage
Tostorerecordingsonthenetwork,youneedtosetupyournetworkstorage.
1.GotoSystem>Storage.
2.Click+AddnetworkstorageunderNetworkstorage.
3.TypetheIPaddressofthehostserver.
4.TypethenameofthesharedlocationonthehostserverunderNetworkShare.
5.Typetheusernameandpassword.
6.SelecttheSMBversionorleaveitonAuto.
7.CheckAddshareevenifconnectionfailsifyouareexperiencingtemporaryconnectionissues,ortheshareisnot
yetcongured.
8.ClickAdd.
Recordandwatchvideo
Recordvideodirectlyfromthecamera
1.GotoVideo>Image.
2.Tostartarecording,click
.
Ifyouhaven’tsetupanystorage,clickSetup.YoucanuseanSDcardornetworkstorage.
-SeeSetupnetworkstorageonpage12.
3.Tostoprecording,click
again.
Watchvideo
1.GotoRecordings.
2.Click
foryourrecordinginthelist.
Setuprulesforevents
Youcancreaterulestomakeyourdeviceperformanactionwhencertaineventsoccur.Aruleconsistsofconditionsandactions.
Theconditionscanbeusedtotriggertheactions.Forexample,thedevicecanstartarecordingorsendanemailwhenitdetects
motion,orshowanoverlaytextwhilethedeviceisrecording.
Tolearnmore,checkoutourguideGetstartedwithrulesforevents.
Triggeranaction
1.GotoSystem>Eventsandaddarule.Theruledeneswhenthedevicewillperformcertainactions.Youcanset
uprulesasscheduled,recurring,ormanuallytriggered.
12