Axis TW1201 User Manual (English)

Other manuals for Axis TW1201

User Manual62 pages

Installation Guide30 pages

Questions and Answers:

T
Tammy BridgesAug 22, 2025
What to do if my Axis Security Camera doesn't turn on?
- C
  Craig VargasAug 22, 2025
  If your Axis Security Camera isn't turning on, there are several possible reasons. First, the camera might be in shipping mode, in which case you should add it to the body worn system. Second, the camera may be out of battery, so try charging it. If charging doesn't resolve the issue, press and hold the power button for 4 seconds, then dock the camera until it's charged, and finally, undock it and wait for it to restart. Alternatively, without a docking station, press and hold the power button for 4 seconds and charge the camera using a USB charger.
C
Cody WatkinsAug 23, 2025
Why are my Axis TW1201 Security Camera recordings offloading slowly?
- T
  Tyler MeyersAug 23, 2025
  If your Axis Security Camera recordings are slow to offload, it might be due to multiple simultaneous offloads affecting the transfer speed. To resolve this, check the camera status in AXIS Body Worn Manager and wait for the recordings to be transferred.
A
Amy AndersonAug 25, 2025
Why is my Axis Security Camera not recording location data?
- M
  Mrs. Katherine OrozcoAug 26, 2025
  If your Axis Security Camera is not recording location data, it could be due to a couple of reasons. First, location data might be turned off in the camera profile, so you should go to the camera profile and turn it on. Second, the body worn system time might be incorrect. To fix this, set a correct system time, preferably using an NTP server (DHCP) or NTP static and fallback server for accuracy.
C
cunninghamashleyAug 26, 2025
Why Axis Security Camera is not discovered by the system?
- K
  Kyle TuckerAug 27, 2025
  If your Axis Security Camera is not discovered by the system and doesn’t appear in AXIS Body Worn Manager, it may be because the docking station is connected to the system controller through a router. To fix this, enable IPv6 on the network.
B
Brandon ChapmanAug 27, 2025
Why is there no audio in my Axis TW1201 recordings?
- C
  carol73Aug 27, 2025
  If there's no audio in your Axis Security Camera recordings, the audio might be turned off in the camera profile. To fix this, ensure that audio is turned on in the camera profile within AXIS Body Worn Manager.
J
John EstradaAug 29, 2025
Why does the image on my Axis TW1201 look foggy?
- M
  Megan MoyerAug 29, 2025
  If your Axis Security Camera image looks foggy, it might be because the lens is dirty. In this case, clean the lens. Alternatively, the protective film might still be on the lens window, so remove it.
R
Ronald KellyAug 30, 2025
What to do if my Axis TW1201 Security Camera doesn't record?
- M
  Michael SimpsonAug 30, 2025
  If your Axis Security Camera is not recording, the camera storage might be full (indicated by a red storage status). To resolve this, dock the camera.
J
Jamie MontgomerySep 1, 2025
Why don't my Axis Security Camera recordings appear in content destination?
- J
  jrichardsonSep 1, 2025
  If your Axis Security Camera recordings don't appear in the content destination, the content destination might be unavailable. To check this, review the content destination status on the Dashboard in AXIS Body Worn Manager.
W
Wesley RobinsonSep 2, 2025
Why are my Axis TW1201 recordings being deleted?
- T
  tracy50Sep 2, 2025
  If your Axis Security Camera recordings are being deleted, the retention time of the content destination might be too short. To resolve this, change the retention time on the content destination to a higher value.
A
Amy JenkinsSep 4, 2025
Why is there no location data in the text overlay of my Axis TW1201 Security Camera?
- R
  Robert MitchellSep 4, 2025
  If there is no location data in the text overlay of your Axis Security Camera, location data might be turned off. Turn Location data on in the camera profile to resolve this.