Axis TW1201 - Add System Controllers; Certificates

Axisbodywornsolution
Configureyoursystem
2.Accessthenewsystemcontroller,seeAccessAXISBodyWornManagerforthersttime.
3.SelectExtendanexistingsystem.
4.CreateanadministratorpasswordandclickOkay.
5.TypeintheIPaddressofthesystemcontrollerthatyouinitiallycreatedthebodywornsystemon,andclickConnect.
6.Addthenewsystemcontrollertothebodywornsystem,seeAddsystemcontrollers.
Addsystemcontrollers
1.Installthenewsystemcontroller,seeExtendthesystem
2.GotoDevices.
3.Inthesystemcontrollerlist,clickNew.
4.IntheAddsystemcontrollerslist,selectthesystemcontroller(s)youwanttoaddandclickAdd.
Certicates
Certicatesauthenticatedevicesonanetwork,andenableencryptedwebbrowsingusingHTTPS.Werecommendusingcerticates
tosecurelyconnecttoyourbodywornsystem.
Tosecurelyconnecttoyourbodywornsystem:
1.Createacerticatesigningrequest
2.UseyourCA(certicateauthority)tosigntheCSR(certicatesigningrequest).
3.Installcerticate
Createacerticatesigningrequest
1.GotoSettings>Certicates.
2.ClickCreate.
3.InCreateself-signedcerticate,enteryourvaluesandclickCreate.
4.Openthecontextmenu
nexttothenewcerticate.
5.ClickCreatesigningrequest.
6.InCreatecerticatesigningrequest,clickCreate.
7.IntheSigningrequestdialog,copythewholetextandpasteitintoalewiththelename<filename>.csr.
Note
Alternatively,youcancreateasigningrequestforthealreadyexistingDefault(self-signed)certicate.
Installcerticate
1.GotoSettings>Certicates.
2.ClickInstall.
3.ClickSelectleandlocateyoursignedcerticatewiththelename<filename>.crt.
4.ClickInstall.
15