Axis W700 - User Manual

Other manuals for Axis W700

Manual53 pages

Installation Guide32 pages

Questions and Answers

V
vguerreroSep 18, 2025
Why Axis Security Camera doesn't turn on?
- K
  Kathy KingSep 18, 2025
  There are several reasons why your Axis Security Camera might not be turning on. It could be in shipping mode, in which case you should add the camera to the body worn system. Another possibility is that the camera battery is completely discharged; try charging the camera. If charging doesn’t resolve the issue, press and hold the power button for 4 seconds, then dock the camera until it’s charged. If you don’t have a docking station, press and hold the power button for 4 seconds and charge the camera using a USB charger.
J
Jessica MurphyAug 25, 2025
How to fix no audio in Axis Digital Camera recordings?
- K
  Keith AcostaAug 25, 2025
  If there is no audio in your Axis Digital Camera recordings, make sure audio is turned on in the camera profile within AXIS Body Worn Manager.
M
Mary SimsAug 26, 2025
What to do if my Axis Digital Camera doesn't record?
- E
  elizabethhuffAug 26, 2025
  Your Axis Digital Camera might not be recording because the camera storage is full (storage status is red). Try docking the camera to resolve this issue. Other possible causes are: pre-buffer video is not complete because pre-buffer time is shorter than configured in AXIS Body Worn Manager; recording started directly after the previous recording was ended; when using the maximum resolution 1080p in very complex scenes with a lot of movement, or in low light, the pre-buffer memory can get full.
A
Anna JohnsonAug 27, 2025
Why is offloading recordings slow on my Axis Digital Camera?
- S
  stephenandersonAug 27, 2025
  If offloading recordings from your Axis Digital Camera is slow, it may be due to many simultaneous offloads affecting transfer speed. Check the camera status in AXIS Body Worn Manager and wait for recordings to be transferred.
J
Jessica GlennSep 23, 2025
What to do if Axis Security Camera image looks foggy?
- T
  Thomas SimpsonSep 23, 2025
  If the image from your Axis Security Camera appears foggy, it could be due to a dirty lens. Clean the lens carefully. Alternatively, check if the protective film is still on the lens window and remove it.
J
Jeremy BrownSep 23, 2025
What to do if Axis Security Camera doesn't record?
- D
  Diana SandersSep 23, 2025
  If your Axis Security Camera isn't recording, the most likely cause is that the camera storage is full. In this case, dock the camera.
R
Robert CooperSep 10, 2025
Why doesn't the LED display work on my Axis W700?
- M
  Martha TuckerSep 10, 2025
  If the LED display on your Axis Security Camera isn't working, the camera might be in silent mode, which turns off the display. To resolve this, press the top button for 2 seconds.
S
Sheila LoganSep 12, 2025
Why can't I find system controller in AXIS IP Utility for Axis W700 Security Camera?
- C
  Cynthia CampbellSep 12, 2025
  If you can't find the system controller in AXIS IP Utility, you might be using an old version of AXIS IP Utility. Upgrade to AXIS IP Utility version 4.14 or later.
G
garygarrettSep 4, 2025
Why is there no audio in my Axis Security Camera recordings?
- J
  Justin LyonsSep 4, 2025
  If there's no audio in your Axis Security Camera recordings, the audio might be turned off in the camera profile. To fix this, ensure that audio is turned on in the camera profile within AXIS Body Worn Manager.
E
Eric GonzalesSep 1, 2025
Why is my Axis W700 Security Camera not recording location data?
- M
  Matthew MccormickSep 1, 2025
  If your Axis Security Camera is not recording location data, it could be due to a couple of reasons. First, location data might be turned off in the camera profile, so you should go to the camera profile and turn it on. Second, the body worn system time might be incorrect. To fix this, set a correct system time, preferably using an NTP server (DHCP) or NTP static and fallback server for accuracy.