Axis W700 - Page 19

Axisbodywornsolution
Configureyoursystem
2.ClickShowcerticatesettings.
3.Click
.
4.SelectCreateself-signedcerticateandclickNext.
5.InCreateself-signedcerticate,enteryourvaluesandclickCreate.
6.Openthecontextmenu
nexttothenewcerticate.
7.ClickCreatesigningrequest.
8.InCreatecerticatesigningrequest,clickCreate.
9.IntheSigningrequestdialog,copythewholetextandpasteitintoalewiththelename<filename>.csr.
Note
Alternatively,youcancreateasigningrequestforthealreadyexistingDefault(self-signed)certicate.
Installcerticate
Note
Theinstalledcerticategetsitsnamefromtheuploaded.crtle,minusthesufx.Thisnamemustbeunique.
1.GotoSettings>CerticatesandIEEE802.1x.
2.ClickShowcerticatesettings.
3.Click
.
4.SelectUploadaCAcerticate.
5.ClickSelectleandlocateyoursignedcerticatewiththelename<filename>.crt.
6.ClickInstall.
7.Openthecontextmenu
nexttothecerticate.
8.ClickActivate.
Setup802.1x
1.Connectthebodywornsystemtoanetworkwithout802.1x.
2.GotoSettings>CerticatesandIEEE802.1x.
3.ClickShowcerticatesettings.
4.Clickandcreateanew,orinstallanexistingcerticate.
5.Under802.1xselectthecerticateyouinstalled.
6.EnterEAPidentity.
7.SelectUseIEEE802.1x.
8.ClickSave.
9.ThepagedisplaysConnecting…
19