WHITE
AXMINSTER
W
03
What’s in the Box...
Quantity Item Model Number
Box 1 MC1018
1 No. AWSL/ AWVSL Lathe Headstock and Tailstock fitted
1 No. Toolrest Arm Fitted to lathe bed
1 No. 140mm Tool rest Fitted to Toolrest arm
1 No. 80mm Faceplate Fitted to Headstock
1 No. Packet containing:-
1 No. 4 Prong Drive Centre
1 No. Revolving Centre
1 No. Handle for Tailstock Adjusting Wheel
2 No. Rubber Feet with integral M8 bolts (for use with the Bed extension)
2 No. Flat Washers
2 No. Spring Washers
1 No. 8mm Allen Key
1 No. 6mm Allen Key
1 No. 3mm Allen Key
1 No. Instruction Manual
1 No. Guarantee Card
Box 2
1 No. AWSL/AWVSL Bed Extension (THIS IS AN OPTION)
1 No. Instruction Leaflet
2 No. Bolts
Having unpacked your new AWSL, AWVSL woodturning lathe please dispose of the unwanted
packaging responsibly. The cardboard packaging is biodegradable.
General Instructions for 240V Machines...
These machines are supplied with a moulded 13 Amp. Plug and 3 core power cable. Before using the
machine inspect the cable and the plug to make sure that neither are damaged. If any damage is visible
have the tool inspected/repaired by a suitably qualified person. If it is necessary to replace the plug, it is
preferable to use an ‘unbreakable’ type that will resist damage. Only use a 13 Amp plug, and make sure
the cable clamp is tightened securely. Fuse as required. If extension leads are to be used, carry out the
same safety checks on them, and ensure that they are correctly rated to safely supply the current that
is required for your machine.
The following suggestions will enable you to observe good working
practices, keep yourself and fellow workers safe and maintain your
tools and equipment in good working order.
Good Working Practices/Safety
Primary Precautions
WARNING!!
!
KEEP TOOLS AND EQUIPMENT OUT
OF THE REACH OF YOUNG CHILDREN
To Next Page
Loading...
