Axminster MJ343B - Page 30

Blades/Accessories
30
Standard Axcaliber Bandsaw Blades
Axcaliber Ground Tooth Bandsaw Blades
Axcaliber GT bandsaw blades are made from a high
carbon content steel band with diamond ground
teeth. This gives a much higher level of accuracy in
the tooth formation, plus they stay sharp for at least
30% longer than normal, milled tooth blades. The
result is a smoother cut for much longer, a really
useful step forward for bandsaw blades.
An optional wheel kit to provide mobility for the
Axminster Hobby Series HBS310N and HBS350N
bandsaws. Includes a bolt-on handle for the bandsaw
frame.
HBS310 & 350N Mobility Kit 508207
Code
Axminster Hobby Series HBS310 & 350N Wheel Kit
Axminster HBS310N Bandsaw
4 skip 1/4” 211533
6 skip 1/4” 211534
14 reg 1/4” 211537
4 skip 3/8” 211538
6 skip 3/8” 211539
10 reg 1/4” 211540
10 reg 3/8” 211541
14 reg 3/8” 211542
24 reg 3/8” 211543
4 skip 1/2” 211544
6 skip 1/2” 211545
10 reg 1/2” 211546
14 reg 1/2” 211547
24 reg 1/2” 211548
TPI Width Code
2,270mm(89”) x 0.025”
6 1/4” 505260
10 1/4” 505261
4 3/8” 505262
6 3/8” 505263
10 3/8” 505264
3 1/2” 505265
4 1/2” 505266
6 1/2” 505267
10 1/2” 505268
3 3/4” 505269
4 3/4” 505270
TPI Width Code
2,270mm(89”)