are being subjected to distraction. A deep cut, a lost
fingertip or worse; is not worth it!
Do not use this machine within the designated safety
areas of flammable liquid stores or in areas where
there may be volatile gases. There are very expensive,
very specialised machines for working in these areas,
THIS IS NOT ONE OF THEM.
Check that blades are the correct type and size, are
undamaged and are kept clean and sharp, this will
maintain their operating performance and lessen the
loading on the machine.
Above all, OBSERVE…. make sure you know what
is happening around you and USE YOUR COMMON
SENSE.
Code 508205
Model HBS310N
Rating Hobby
Power 550W 230V
Blade Speed 360 & 720 m/min
Blade Length 2,270mm
Blade Width Min/Max 6mm (1/4”) to 16mm (5/8”)
Max Width of Cut 305mm
Max Depth of Cut 180mm
Max Width of Cut with Fence 265mm
Table Size 500 x 400mm
Table Height on Stand 1,005mm
Table Tilt -5° to +45°
Wheel Diameter 350mm
Dust Extraction Outlet 100mm
Overall L x W x H 760 x 720 x 1,700mm
Weight 80kg
To Next Page
Loading...
