Chapter 3: Recording with the Axon Body 2 Camera 9
Axon Body 2 Camera User Manual
Exiting Stealth Mode using the Axon Body 2 Camera Battery Status button:
• While the camera is on and in stealth mode, press and hold the Battery Status button for 10
seconds.
Entering and Exiting Stealth Mode using Axon View:
Go to help.axon.com or see the Axon View for Android Devices User Manual or the Axon View for
iOS Devices User Manual for detailed information about using Axon View.
• Your Axon Body 2 camera must be turned on and paired with your mobile device. Open Axon
View app on your mobile device and go to Settings. Tap the switch to the right of the Stealth
Mode to change the setting.
Entering and Exiting Stealth Mode using Axon View XL (Axon Fleet 2):
Go to help.axon.com or see the Axon View XL Operations Guide for detailed information about
using Axon View XL.
• Your Axon Body 2 camera must be turned on and paired with Axon View XL. In Axon View XL
go to Settings. Tap the switch to the right of the Stealth to change the setting.
Turning On or O Stealth Mode using Axon Evidence:
Go to help.axon.com or see the Axon Evidence.com User and Administrator Reference Guide for
detailed information about changing device settings.
Note: The updated settings will not take eect until the next time the camera is docked.
• Sign in to your Axon Evidence account and go to the Device Profile page for your Axon Body 2
camera. In the Settings section, select the On or O setting for Stealth. Save the new setting.
Turning On or O Stealth Mode using Evidence Sync:
Go to help.axon.com or see the Evidence Sync User Manual for detailed information about
changing device settings.
• Connect your Axon Body 2 camera to the Evidence Sync application. Sign in to Evidence Sync
and go to the Device Settings tab for your camera. Select the On or O setting for Stealth
Mode. Save the new setting.
Turning On or O Stealth Mode using Axon Commander:
Go to help.axon.com or see the Axon Commander User and Administrator Guide for detailed
information about changing device settings.
Note: The updated settings will not take eect until the next time the camera is docked.
• Sign in to the Axon Commander client and go to User Device Settings. Select your Axon Body
2 camera and then select the On or O setting for Stealth Mode. Apply the new setting.
Adjusting Audio Prompt Volume
During normal operation, Axon Body 2 cameras emit beeping sounds, called audio prompts, to
notify you of the camera status.
If allowed by your organization, there are several ways you can adjust camera audio prompt
volume.
To Next Page
Loading...
Need help?
General
