6
Chapter 3: Recording with the Axon Body 2
Camera
Before using an Axon Body 2 camera, ensure it is fully charged and properly configured. See
Charging the Battery (Chapter 6) for more information.
Operating Modes
The Axon Body 2 camera has 2 operating modes:
1 BUFFERING (turning on the camera and starting pre-event buering)
2 EVENT (event recording)
BUFFERING Mode (Turning on the Camera)
1 Move the Power Switch on the camera to the On position.
When the camera turned on, the Operation LED will be solid red, and it takes a few
seconds to boot up and enter BUFFERING mode. When BUFFERING begins:
• The Operation LED on the camera will blink green.
• The camera will be capturing video, but no audio, and will not record to permanent
memory while in BUFFERING mode.
• Buered video duration is 30 seconds by default (00:00:30).
When you activate the EVENT mode, the buered video (not audio) captured directly
before the event, up to 30 seconds, will be saved and attached to the event in permanent
memory. This feature is intended to capture the video of an incident just before your
activation of EVENT mode.
To Next Page
Loading...
Need help?
General
