Need help?Do you have a question about the Axon Cerebrum CGP-4848 and is the answer not in the manual?
Power| AC PSU voltage | 100–240 V AC |
|---|---|
| AC PSU current | 1.2 A |
| AC PSU frequency | 50/60 Hz |
| panel input voltage | 12 V DC |
| panel input current | 2.0 A |
Operating Environment| operating temperature | 0º to 40º C |
|---|---|
| storage temperature | -20º to 70º C |
Weight and Dimensions| height | 45 mm |
|---|---|
| width including front panel | 484 mm |
| depth including front panel and DC connector | 195 mm |
| width excluding front panel | 450 mm |
| depth excluding front panel including DC connector | 175 mm |
| weight excluding power adapter | 2.5 kg |
Provides an introduction to Cerebrum software's role in modern broadcasting workflows.
Highlights Cerebrum's capabilities in configuring, controlling, and maintaining workflows.
Details Cerebrum's tools for configuring workflows and managing devices with speed and ease.
Explains how Cerebrum tracks workflow events and device status using icons and logs.
Introduces the CGP-4848 as a 1U rack mount interface unit with 48 GPI inputs and outputs.
Describes features like optical isolation, relay contacts, Ethernet connectivity, and status indicators.
Details the connection procedures for the 37-way D-type connectors.
Explains how to activate GPI inputs using voltage drops and optical isolation.
Describes GPO outputs using relay contacts, including normally open and closed options.
Provides detailed pinout for 37-pin D-type female connectors for GPI inputs.
Provides detailed pinout for 37-pin D-type male connectors for GPI outputs.
Guide to setting the unit's IP address using Cerebrum V1.07 or higher.
Steps to add the CGP-4848 device to the Cerebrum application via the Network menu.
How to configure the CGP-4848 for status detection and GP output triggering.
Procedure to put the unit into bootloader mode via Ethernet connection.
Process of uploading new firmware via a web browser in bootmode.
Physical dimensions and weight of the CGP-4848 unit.
Details AC PSU and panel input power specifications.
Technical details for GPI inputs and GPO outputs, including voltage and current.
Specifies the local output voltage and maximum current available on input connectors.
Covers operating and storage temperature ranges for the unit.
To Next Page