1
MICROSPEED
REV 04/05
The amplifier series is distributed with the CE mark, because they
are in accordance with the European Directives on EMC and Low
Voltage.
WARNING!
ELECTRICAL AND CONTROL EQUIPMENT CAN BE
DANGEROUS IF HANDLED IMPROPERLY
This manual describes the mechanical and electrical
characterists of the Microspeed series.
It is important, that the installation procedures are only performed
by qualified personnel in accordance with local safety guidelines.
Whoever installs the equipment must follow all of the technical
instructions printed in this manual.
For more information, please contact AXOR’S technical
department.
All rights reserved.Reproduction in whole or in part is prohibited without prior written
consent of the copyright owner.
All specifications are subject to change without prior notice.
English
To Next Page
Need help?
General
