USB OPERATION
The unit will read the audio/video files on USB devices automatically.
NOTE: The USB port will recognize most USB flash memory devices and
portable hard drives. Hard drives must be formatted to FAT32. NTFS is not
supported.
Inserting / Removing a USB Device
To insert a USB device:
1. Locate the Interface Cover on the front of the radio.
AV INPUT
OPEN
3.5mm A/V Cable (not included)
V ideo
Left Audio
Right Audio
Ground
1
2
3
4
USB Cable (not included)
USB Slot and microSD Card Slot Location
2. Lift the protective cover to reveal the USB slot.
3. Insert the USB device into the USB port.
Note: The microSD card is used for navigation only. Do not modify/delete
any files on the SD card.
MicroSD card slot
To Next Page
Loading...
