How to fix Axxera AC504BiM Receiver if it will not turn on?
If your Axxera Receiver unit isn't turning on, it could be due to a few reasons: * The yellow or red wire might not be connected properly, or the voltage is incorrect. Ensure the connections are correct and the voltage is between 11 and 16VDC. * The black wire might not be connected to ground. Check this connection. * The fuse might be blown. If so, replace it with a new one.
Why does my Axxera Receiver keep blowing fuses?
If your Axxera Receiver is blowing fuses, it could be due to several reasons: * The yellow or red wire might be touching the chassis ground. Check for any pinched wires. * Speaker wires might be touching the chassis ground. Inspect for pinched wires. * The fuse rating might be incorrect. Make sure you're using a fuse with the correct rating.
What to do if my Axxera AC504BiM Receiver has power but no sound?
If your Axxera Receiver has power but no sound, it might be due to the following: * Speaker wires are not connected. Check the connections at the speakers. * One or more speaker wires are touching each other or the chassis ground. Insulate all bare speaker wires from each other and the chassis ground.
Why Axxera Receiver will not accept a disc?
If your Axxera Receiver unit will not accept a disc, it could be due to: * The CD mechanism position being out of alignment. Press and hold the EJECT button for 3 seconds to reset the CD mechanism position. * The CD transit screws are still in place. Remove the 2 transit screws located on top of the unit.
How to stop Axxera Receiver from excessive skipping?
If you are experiencing excessive skipping with your Axxera Receiver, it could be due to: * The unit not being mounted correctly or the backstrap not being secure. Check the mounting sleeve and backstrap support. * A physical defect in the media (CD, CD-R, or CD-RW). Check the media for scratches.
What does "NO SUPPORT" mean on my Axxera AC504BiM Receiver?
If "NO SUPPORT" appears on the display of your Axxera Receiver, it means: * An invalid ID3 tag version is present. The receiver supports version 1.0 to 2.4 ID3 tags. * An ID3 tag character is not supported. Only ASCII characters are supported.
What does ERROR 2 mean on Axxera AC504BiM Receiver?
If "ERROR 2" appears on the display of your Axxera Receiver, it indicates a disc read error or that the disc is inserted upside down. Try pressing the EJECT or RESET button.
What does NO FILE mean on my Axxera AC504BiM display?
If "NO FILE" appears on the display of your Axxera Receiver, it means the selected file is not available in direct or alphanumeric search modes. Repeat the search using valid parameters.
What does PROTECT mean on the display of my Axxera AC504BiM Receiver?
If "PROTECT" appears on the display of your Axxera Receiver, it means the WMA file is copy-protected by DRM (Digital Rights Management). Write the disc using WMA files that are not copy-protected.
Overview of steps before installing the unit.
Illustrates electrical connections for the unit.
Basic functions and operation of the receiver unit.
Configuration options and settings for the unit.
How to insert, eject, and control CD playback.
Connecting USB devices and initial playback steps.
Steps for pairing Bluetooth devices with the unit.
Making, receiving, and ending phone calls via Bluetooth.
Common problems, their causes, and solutions.
General| Brand | Axxera |
|---|---|
| Model | AC504BiM |
| Category | Receiver |
| Channels | 4 |
| Bluetooth | Yes |
| USB Port | Yes |
| Preamp Outputs | Yes |
| Equalizer | Yes |
| Display Type | LCD |
| Touchscreen | Yes |
| SD Card Slot | Yes |
| Subwoofer Output | Yes |
| Steering Wheel Control Compatible | Yes |
| Rear View Camera Input | Yes |
| Auxiliary Input | Yes |
| Remote Control | Yes |
To Next Page
