Axxera AC504BiM - Bluetooth Operation - During a Call

26
AC504BiM OPERATION
During a Phone Call
Turn the volume knob to adjust the volume level during a
phone call. Bluetooth mode has a separate volume level
from the main volume of other modes. The AC504BiM will
remember the volume level in Bluetooth mode and always
return to the last volume level for each phone call.
Press MUTE during a phone call to turn the AC504BiM's
external microphone off. Press MUTE again to resume
microphone operation.
Press DISP during a phone call to transfer the call from the
AC504BiM to the cell phone. Press DISP again to toggle
the audio back to the AC504BiM.
During a phone call, if there is a second incoming call, press
to place the first call on hold and switch to the second
phone call. Press
again to switch back to the first call.
During a phone call, when there are no additional incoming
calls, press
to place the call on hold. Press again to
resume the phone call.
Note: Audio transfer, call waiting and call hold must be
supported by the mobile phone and service provider to
function properly.
Volume
Microphone Mute
Audio Transfer
Call Waiting
Call Hold
Bluetooth Setup Menu Options
Function Options Action
Bluetooth
BT
(ON/OFF)
Enables/disables Bluetooth functionality.
Auto Answer
ANSWER
(MENU/AUTO)
When set to ON, every incoming phone call will automatically be
answered after 2-3 rings. When set to OFF, the
button must
be pressed to answer incoming phone calls.
Bluetooth
®
Operation