25
AC504BiM OPERATION
Bluetooth
®
Operation
Making a Phone Call
Note: Placing a phone call from your cell phone will also use
the Bluetooth function of the AC504BiM.
• Press SELECT from Bluetooth mode to view the 10 most
recent phone calls that were dialed, received or missed
while connected to the AC504BiM.
• Turn the volume knob to cycle through the recent phone
numbers. Press SELECT or
to dial the phone number.
To redial the last phone number, press
two times from
Bluetooth mode. Press
again to redial the phone number.
Recent Calls List
Redialing the last num-
ber
Receiving and Ending Phone Calls
Incoming phone calls will automatically appear on the display
and a ring tone will be heard.
Note: The volume of the ring tone depends on the volume
level of the AC504BiM. The incoming ring tone may not be
heard if the volume is set to a low level or mute is activated.
• Press
to receive the incoming phone call.
• Press
to refuse the incoming phone call.
Note: If Auto Answer is set to ON in the setup menu, all
phone calls will be received automatically.
During an active phone call, press
to end a phone call.
If the phone call was received when listening to music in
another mode, the AC504BiM will resume the previous
mode.
Receiving a Phone Call
Ending a Phone Call
To Next Page
Loading...
