To put the unit in full standby mode (black screen with no text display), choose
Standby from the Menu screen.
To resolve abnormal operation or if the unit is inoperable, use the tip of a pen
to press the RESET button located in the top right corner. The unit will reset
the main processor to the default settings.
From any operational mode, press the
icon in the bottom left corner of
the screen to access the Audio menu.
After audio adjustment is complete, press
to return to the previous
screen.
General Operation
Standby Mode
Reset
Audio Setup
Exit Audio Setup
Menu Option Action
Levels
EQ
Press or to select between the preset
equalization curves (User, Flat, Jazz, Pop, Rock,
Soft, Vocal, Classic, Dance, Movie and Hip-Hop), or
manually adjust the subwoofer (SW), bass (BASS),
midrange (MID) or treble (TREB) levels by manually
dragging the adjustment button right or left.
Loudness
Press Off or On to deactivate or activate the
Loudness feature.
Position
Balance
Drag the adjustment button to adjust Balance
Left or Right.
Fader
Fader - Drag the adjustment button to adjust
Fader Front or Rear.
Setup
Bass
Select a Bass setting: 60Hz, 80Hz, 100Hz, or
200Hz.
Midrange
Select a Midrange setting: 500Hz, 1KHz, 1.5KHz
or 2.5KHz.
Treble
Select a Treble setting: 10KHz, 12.5KHz, 15KHz
or 17.5KHz
Crossover
Subwoofer
Low-Pass Filter
Select setting for the Subwoofer Low-Pass Filter:
80Hz, 120Hz or 160Hz.
To Next Page
Loading...
