Axxera AXV820 - Wiring Diagram and Connections

7
AXV820
iPod Operation
Play / Pause
Next Song
Previous Song
Random
Repeat
Menu Mode
Bluetooth Microphone
Pairing and Connecting
Dialing a Number
Making and Ending a Call
Transferring Audio
Streaming Audio
Auxiliary Inputs
Rear Camera
Use the included video cable to connect an iPod to the AXV820 and
enable audio and video playback from your iPod device.
Press
to pause playback. Press again to resume.
Press to advance to the next song.
Press to go back to the previous song.
Press once to random play all songs within the list. Press twice
to random play all songs on the current album. Press again to cancel
the random function.
Press
to repeat current song. Press again to turn off the repeat
function,
Press
to enter menu mode to toggle between Music, Video and
Photo files to navigate using the up and down arrow buttons.
Bluetooth features of the AXV820 function with either the unit's
internal microphone or the included external microphone, which is
designed for mounting to the visor or A-pillar inside the vehicle.
Before you can use a Bluetooth device, it must be paired and
connected. The AXV820 broadcasts the pairing signal constantly when
nodevicesarecurrentlyconnected.Completethepairingsequence
from your Bluetooth device. The device name is "AXV820". The
Bluetooth passcode "1234". Once pairing is complete, most
Bluetooth devices will connect automatically.
Press
to display keypad and dial a number.
Press to make a call, and press to end a call.
Press to transfer audio between the head unit and mobile device.
Press A2DP to stream audio from your Bluetooth mobile device
directly to the AXV820.
Connect an optional audio/video source into the 3.5mm input on the
front panel (AV1) or to the red/white/yellow RCA connectors on the
back of the unit (AV2). Select AV1 or AV2 from the Main Menu to
access audio or video.
Connect an optional rear camera to the Camera Input (Black RCA
connector). Touch the Camera icon on the Main Menu to select
camera mode. The unit will automatically select camera mode when
connected to the reverse lamp circuitry.
iPod Operation
Bluetooth Operation
Auxiliary Inputs & Rear Camera Operation