AX-VL90032
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 7/25/19 INSTAX-VL90032
Product Info
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
TABLE OF CONTENTS
Connections to be made .......................................2
Installing the AX-VL90032 interface .................3-4
Programming the ASWC-1 interface .....................5
Volvo XC90 Data Interface with SWC
2004-2014
• Provides accessory power
• Retains R.A.P. (retained accessory power)
• Includes amplifier bypass harness
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains balance and fade
• Micro “B” USB updatable
• AX-VL90032 interface
• ASWC-1 interface
• AX-VL90032 harness
• ASWC-1 harness
• Female 3.5mm connector with stripped leads