Axxess XSVI-6523-NAV User Manual

Installation instructions for part XSVI-6523-NAV
Axxess Integrate
CAUTION! All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Can be used in both amplified and non-amplified models
• Provides NAV outputs (parking brake, reverse, and speed sense)
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
• Retains the factory backup camera (if displayed through the OE radio)
• Retains the 3.5mm AUX-IN jack
• Retains balance and fade
• Micro “B” USB updatable
INTERFACE FEATURES
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
TOOLS REQUIRED
XSVI-6523-NAV
Chrysler Data Interface 2013-up
APPLICATIONS
• XSVI-6523-NAV interface • XSVI-6523-NAV harness
INTERFACE COMPONENTS
Connections to be made ................................................... 2
Installing the XSVI-6525-NAV .......................................... 3
Initializing the XSVI-6525-NAV ........................................ 3
TABLE OF CONTENTS
CHRYSLER
200 LX 2015-up
DODGE
Dart (small screen option)
2013-up
FIAT
500L 2014-up
500X 2016-up
JEEP
Cherokee Sport 2014-up
Renegade 2015-up
RAM
1500/2500/3500
(small screen option) 2013-up
Chassis Cab 3500/4500/5500
(small screen option) 2013-up
Promaster 2014-up
Promaster City 2015-up

Axxess XSVI-6523-NAV Specifications

General

Brand	Axxess
Model	XSVI-6523-NAV
Category	Automobile Accessories
Language	English

Summary

Interface Features

Accessory Power and R.A.P. Retention

Provides 12-volt accessory power (10-amp) and retains Retained Accessory Power (R.A.P.).

Amplified and Non-Amplified Compatibility

Can be used with both amplified and non-amplified audio systems.

NAV Outputs and Camera/Audio Retention

Provides NAV outputs (parking brake, reverse, speed sense), retains backup camera and 3.5mm AUX-IN.

Additional Features

Retains balance and fade, and is Micro "B" USB updatable.

Interface Components and Tools

Interface Components

Includes the XSVI-6523-NAV interface and XSVI-6523-NAV harness.

Required Tools

Tools required include wire cutters, crimp tool, solder gun, tape, and connectors.

Vehicle Applications

Chrysler, Dodge, Fiat, Jeep, and Ram Applications

Lists compatible Chrysler, Dodge, Fiat, Jeep, and Ram models with applicable years.

Wiring Connections

Connections to Aftermarket Radio

Details wire connections from the interface harness to the aftermarket radio for power, ground, and speakers.

NAV/Multimedia Connections

Connects wires for VSS, reverse, parking brake, and RCA jacks for backup camera/AUX input.

ASWC-1 Harness Connection

Instructions for connecting the 12-pin ASWC-1 harness to retain steering wheel audio controls.

Installation and Initialization

Installing the XSVI-6523-NAV

Steps for connecting the interface harness to the vehicle wiring with the key in the off position.

Initializing the XSVI-6523-NAV

Procedure for initializing the interface, including specific steps for Fiat 500L/Ram Promaster City and other models.