CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
XSVI-1731-NAV
INSTALLATION INSTRUCTIONS
INTERFACE COMPONENTS
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
TABLE OF CONTENTS
Connections to be made .......................................2
Installing the XSVI-1731-NAV .................................3
Initializing the XSVI-1731-NAV ...............................3
APPLICATIONS
• Provides NAV outputs (parking brake, reverse, and speed sense)
• Pre-wired ASWC-1 harness included (ASWC-1 sold separately)
• Retains the factory backup camera
• Retains balance and fade
• Includes the AX-CAM6V 12-volt to 6-volt converter
• Micro “B” USB updatable
HONDA
Civic LX 2016-up
• XSVI-1731-NAV interface
• XSVI-1731-NAV harness
• AX-CAM6V 12-volt to 6-volt converter
Honda Data Interface 2016-up*
INTERFACE FEATURES
To Next Page
Need help?
General
