Installation instructions for AX-ADBOX2
METRA. The World’s best kits.™ metraonline.com1-800-221-0932
© COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
REV. 10/17/2014 INSTAX-ADBOX2
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Note: This is a general list for the AX-ADBOX2 lineup. Please see the individual
harnesses for exact features available.
• Providesaccessory(12-volt10-amp)
• RetainsR.A.P.(retainedaccessorypower)
• Usedinamplified,non-amplifiedsystems
• Retainschimes(GM)
• Turnsignalclick(GM)
• ProvidesNAVoutputs(parkingbrake,reverse,mute,andV.S.S.)
• Pre-wiredASWC-1harnessincluded(ASWC-1soldseparately)
• RetainsOnStar/OEBluetooth
• Adjustablegaincontrolforoverallvolume(onamplifiedsystems)
• AdjustablegaincontrolforchimesandOnStar(GM)
• RetainsSYNCinFord(ifequipped)
• AdjustablegaincontrolforSYNC(Ford)
• RetainsBlindspotdetectionsysteminChrysler/Dodge/Jeep(ifequipped)
• Highlevelspeakerinput
• Micro“B”USBupdatable
• Retainsbalanceandfade
• Retainsdigitalfade(excludingFordandVWvehicles)
Note: If you have a digital amp and you prefer to retain fade control use the
AX-ADBOX1 (excluding Ford and VW vehicles).
FEATURES
•Cuttingtool•Crimpingtool•Tape•Connectors
(example:butt-connectors,bellcaps,etc.)
TOOLS REQUIRED
AX-ADBOX2
AX-ADBOX Series main interface control box
•AX-ADBOX2interface
•16-pinharnesswithstrippedleads
INTERFACE COMPONENTS
APPLICATIONS
See application list inside