LC-GMRC-LAN-09
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 5/27/20 INSTLC-GMRC-LAN-09
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Programming .........................................................3
APPLICATIONS
Chevrolet
Colorado (1) 2015-Up
Equinox (1) 2018
Malibu (2) 2016-2018
Silverado 1500 (3) 2014-2018
Silverado 2500/3500 (3) 2015-2019
Silverado LD (1) 2019
Suburban 2015-Up
Tahoe 2015-Up
GMC
Canyon (1) 2015-2018
Sierra 1500 (3) 2014-2018
Sierra 2500/3500 (3) 2015-2019
Sierra Limited (1) 2019
Yukon / Yukon XL 2015-Up
• LC-GMRC-LAN-09 interface • LC-GMRC-LAN-09 harness
• (1) With RPO code I05 or I06 • (2) With radio code IP1 • (3) With radio code IO3, IO5, or IO6
The RPO code is located in the Service Parts Identification sticker
INTERFACE FEATURES
GM Data Interface 2014-Up
•
Provides accessory power (10-amp)
• Retains R.A.P. (retained
accessory power)
• Provides wires for multimedia
radios (park brake, reverse,
speed sense)
• Used in non-amplified models, or
when bypassing a factory amp
•
Designed for models without
OnStar
• Retains all warning chimes
• High level speaker input
• Retains balance and fade
• Provides illumination output
• Micro-B USB updatable
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications
To Next Page
Need help?
General
