Azbil Corporation Installation
Model VFR - FloWing Eccentric Rotary type Control Valves 1-1
Chapter 1 : Installation
1-1 : Conrming the specications
Prior to installing the valve, check that the model number, size, rating, materials and
other specications indicated on the nameplate attached on the actuator conform with
those which were ordered.
Figure 1-1 Nameplate
Compliance with Regulations
This product complies with the directive below.
• Pressure Equipment Directive (PED) 2014/63/EU
Requirements for workers (installation, operation, maintenance)
To ensure safety, only specialists who are skilled in instrumentation work should
carry out the installation, operation, and maintenance of this device.
To Next Page
Loading...
