Azbil SDC35 - Page 158

5-98
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION

Event setting value display setup
The main setting and sub-setting of Internal Events 1 to 3 to be displayed in the
operation display mode can be set.
Item (Bank) Display Contents Initial value User level
Event setting value display
setup
(Setup bank)
0: Internal Event set value is not displayed
in the operation display mode.
1: Set value of Internal Event 1 is displayed
in the operation display mode.
2: Set values of Internal Events 1 to 2 are
displayed in the operation display mode.
3: Set values of Internal Events 1 to 3 are
displayed in the operation display mode.
0 Standard,
High function
Handling Precautions
• Even though the Internal Event set value is set at [Enabled], the Internal
Event set values are not displayed when the main setting and sub-setting
are not necessary according to the operation type of Internal Event.
• The main setting and sub-setting of Internal Events 4 to 8 cannot be
displayed in the operation display mode.

Event remaining time display setup
The ON delay/OFF delay remaining time of Internal Events 1 to 3 to be displayed in
the operation display mode can be set.
Item (Bank) Display Contents Initial value User level
Event remaining time
display setup
(Setup bank)
0: ON/OFF delay remaining time of Internal
Event is not displayed in the operation
display mode.
1: ON/OFF delay remaining time of Internal
Event 1 is displayed in the operation
display mode.
2: ON/OFF delay remaining time of Internal
Events 1 to 2 are displayed in the
operation display mode.
3: ON/OFF delay remaining time of Internal
Events 1 to 3 are displayed in the
operation display mode.
0 Standard,
High function
Handling Precautions
• Even though the Internal Event remaining time is set at [Enabled], the
remaining time is not displayed when the remaining time display is not
necessary according to the operation type of Internal Event.
• The remaining time of Internal Events 4 to 8 cannot be displayed in the
operation display mode.