Azbil BH-101G0W0000 - User Manual

1
Specifications/Instructions
AB-7333
Supervisory Controller
© 2017–2020 Azbil Corporation. All Rights Reserved.
 Overview
This product (Model BH-101G0_0000) is a Supervisory
Controller that collects information about a primary device
(such as a controller) and provides that information to the
Client PC in savic-net G5, Azbil Corporation's building
management system.
This product receives point information from the primary
device through periodic scan or state change noti cations
and accumulates and manages various kinds of control-
related data.
In addition, the software that can be downloaded from this
product allows you to monitor its state using graphics and
lists, set up several different kinds of controls including
interlock controls and scheduling, view data such as
charts as well as daily, weekly, monthly and yearly reports,
and perform other operations from the Client PC.
This product can also provide information to a third-party
BACnet device.
 Features
Any combination of the following applications is available
as required.
• Equipment status monitoring
This product monitors up to 5000 points of the data
below.
It is possible to connect up to 30 Supervisory Controllers
to monitor up to 150,000 points.
Each Supervisory Controller can also be con gured
for redundancy. (If a redundancy con guration is
implemented, up to 60 Supervisory Controllers can be
connected.)
• Point information in the primary device
• Direct inputs to ensure immediate detection of
power supply state and  re alarms from a building
• Comprehensive control
This product comprehensively controls the devices
connected to the system to realize comfort, safety, and
energy ef ciency.
• Data management
This product stores and manages the following data:
• Data collected from the devices connected to this
product
• Data transmitted from the devices connected to
this product
• Data that has been processed for daily, weekly,
monthly, and yearly reports based on the collected
and transmitted data
• Data visualization
By using the software that comes with this product,
you can display graphics, charts, and daily, weekly,
monthly, and yearly reports on the screen of a Client
PC or output them to a  le.

Summary

Product Overview and Capabilities

System Description

Core System Features

Covers equipment monitoring, comprehensive control, data management, and visualization capabilities.

Safety Precautions and Warnings

Usage Restrictions and Design Life

Outlines product use limitations, instrumentation design, and recommended design life.

Transport Safety and Hazard Symbols

Explains precautions for transporting lithium batteries and interprets safety symbols.

System Configuration

Technical Specifications

Basic Hardware and Environmental Specifications

Input;Output and Wiring Specifications

Installation Guidelines

Installation Location and Angle

Provides instructions on selecting an appropriate control panel location and mounting orientation.

Installation Methods

Control Panel Mounting Example

Wiring and Connections

General Wiring Precautions

Emphasizes grounding, power-off procedures, qualified personnel, and noise measures before wiring.

Terminal Block Wiring

Provides step-by-step instructions for wiring power supply, direct input, and direct output terminal blocks.

Power Management and Maintenance

Power On;Off Procedures

Azbil BH-101G0W0000 Specifications

General

Controller Type	Digital Indicating Controller
Input Type	Thermocouple, RTD, DC Voltage, DC Current
Output Type	Relay, Current
Supply Voltage	100 to 240 VAC, 50/60 Hz
Display	LED Display