To Next PageTo Next Page
Need help?Do you have a question about the Azbil C36 and is the answer not in the manual?
General| Brand | Azbil |
|---|---|
| Model | C36 |
| Category | Controller |
| Language | English |
Essential warnings and cautions for safe operation and hazard prevention.
Identifies and explains controller components like buttons, displays, and indicators.
Outlines initial setup steps from installation to setting PV range and SP.
Details environmental requirements for installation and physical mounting steps, including dimensions.
Provides critical warnings and guidelines for correct and safe electrical wiring connections.
Illustrates the sequence of button presses for navigating settings and changing parameters.
Guides on selecting the correct input sensor (PV range) and setting the desired setpoint (SP).
Lists alarm codes, their causes, and corrective actions for troubleshooting.
Provides basic instructions for cleaning and general upkeep of the controller.
Details how to configure the controller model based on desired inputs, outputs, and functions.
Lists technical specifications, environmental requirements, and power details of the controller.
Lists included accessories with their part numbers.
Describes parameters related to how process values and status are displayed during normal operation.
Details parameters for configuring internal events, conditions, and actions.
Explains parameters for PID control loops, including proportional, integral, and derivative settings.
Covers parameters for operating modes and setting setpoints, including limits and ramps.
Outlines system-level setup parameters, including PV range, units, and communication settings.
Provides detailed configuration options for various event types, trigger conditions, and actions.
Defines how digital inputs are assigned and configured for specific functions or logic operations.
Allows configuration of custom functions, mapping PID parameters to user-defined labels for advanced control.
Manages security settings (locks, passwords) and displays controller hardware/firmware details.
Highlights critical warnings and cautions to ensure safe operation and prevent injury or damage.
Identifies and describes the controller's displays, keys, and indicator lamps for user interaction.
Provides a concise overview of the initial setup process, from mounting to setting PV and SP.
Details environmental requirements for installation and the physical steps for mounting the controller.
Offers essential advice and warnings to ensure correct and safe electrical connections.
Illustrates the sequence of button presses for navigating setup menus and selecting PV range types.
Guides users on choosing the appropriate input sensor type and range from the PV Range Table.
Lists common alarm codes, their causes, and corrective actions for troubleshooting.
Provides instructions for cleaning and replacing the fuse if necessary.
Explains how to configure the controller's model based on required inputs, outputs, and functions.
Lists the technical details, operating conditions, and power requirements for the controller.
Lists the included accessories with their part numbers.
Describes parameters that control how values like PV, SP, and MV are displayed during operation.
Details configuration of internal events, PID control loop settings, and associated parameters.
Covers parameters for zone PID control and system-level setup, including PV range and communication settings.
Provides detailed setup for event types, operation types, and delay times for internal events.
Specifies how digital inputs are assigned to various functions, including logic operations and mode selections.
Allows configuration of custom functions, mapping PID parameters to user-defined labels for advanced control.
Manages security settings (locks, passwords) and displays controller hardware/firmware details.
