To Next PageTo Next Page
Need help?Do you have a question about the Azbil SDC46 and is the answer not in the manual?
General| Control Mode | PID control |
|---|---|
| Output Type | Relay, Voltage pulse, Current |
| Control Output | Relay, Voltage pulse, Current |
| Communication Interface | RS-485 |
| Operating Temperature | 0 to 50°C |
| Input Type | Thermocouple, RTD, DC voltage, Current |
| Display | LED or LCD |
| Power Supply | 100-240V AC |
| Humidity | 20 to 90% RH (non-condensing) |
The primary manual detailing displays, setup items, and setting ranges for the controller.
Covers safety precautions, installation, wiring, and primary specifications.
Details installation, wiring, communication, functions, and troubleshooting.
Identifies and describes the physical parts of the SDC45/46 controller.
Explains the procedures for operating the controller's keys for parameter settings.
Configures operational modes like RUN/READY, AUTO/MANUAL, and AT.
Defines PID parameters (P, I, D, limits, etc.) for Loop 1.
Configures SP ramp, tracking, bias, and digital RSP selection.
Sets control actions, algorithms, ranges, and initialization parameters.
Configures PV input types, units, scaling, and linearization for various inputs.
Sets output types, ranges, scaling, and linearization for continuous and pulse outputs.
Defines SP group selection priority for loops.
Configures multiple SP values and corresponding PID group definitions for Loop 1.
Sets up recipe parameters including event settings and PID parameters for Loop 1.
Lists standard bit codes and their meanings for various functions.
Lists standard numerical codes and their meanings for various parameters.
