To Next PageTo Next Page
Need help?Do you have a question about the Azbil SDC35 and is the answer not in the manual?
General| Output Type | Relay, Voltage pulse, Current |
|---|---|
| Display | Dual 4-digit LED |
| Number of Control Outputs | 1 |
| Alarm Output | Relay |
| Number of Alarm Outputs | 2 |
| Control Method | PID control |
| Input Type | Thermocouple, RTD, DC voltage, DC current |
| Power Supply | 100 to 240 VAC |
| Control Output | Relay, Voltage pulse, Current |
| Communication | RS-485 |
| Panel Cutout Dimensions | 45 x 45 mm |
| Type | Digital Controller |
Manual detailing installation and configuration procedures for the controller.
Summarizes key operations, parameter flowcharts, and settings for convenient on-site reference.
Outlines essential safety notices to prevent injury and property damage.
Lists WARNING and CAUTION statements regarding device usage, wiring, and electrical safety.
Details the unit's input/output configuration, covering PV input, control output, and digital inputs.
Explains how to navigate and operate the unit using the console keys and their functions.
Details crucial wiring precautions, including safety, terminal connections, and cable routing.
Illustrates the wiring diagram for connecting power supply, control outputs, and communication interfaces.
Illustrates RS-485 cable connections for 3-wire and 5-wire systems, including terminating resistor notes.
Details the functional block diagram and settings for PV input, covering various sensor types.
Explains how to select the control method, differentiating between ON/OFF control and Fixed PID.
Lists parameters for fixed PID control, including proportional band, integration time, and derivative time.
Details AT related settings such as MV limits, AT type, and proportional band adjust.
Provides an overview of CPL communication, detailing its features and setup.
Introduces Modbus communication, outlining its features, setup requirements, and communication procedures.
Lists common alarm codes, failure names, causes, and corrective actions for various fault conditions.
Details behavior and alarms for PV input failures across different sensor types.
Provides essential cautions before calibration, emphasizing power supply and ambient conditions.
