To Next PageTo Next Page
Need help?Do you have a question about the Azbil SDC36 and is the answer not in the manual?
General| Brand | Azbil |
|---|---|
| Model | SDC36 |
| Category | Controller |
| Language | English |
Explains warnings and cautions for safe operation and handling of the device, covering environmental and electrical hazards.
Illustrates practical examples of setting PV input range, event operation, and SP values.
Explains the various input and output signals and their configurations within the unit.
Provides guidelines for selecting an appropriate and safe installation location for the unit.
Covers essential safety precautions and general wiring guidelines for the unit.
Provides detailed precautions for wiring, including terminal symbols and cable routing.
Explains the functional block diagram and configuration options for various PV input types.
Outlines the functional block diagrams for ON/OFF control, PID control, and Heat/Cool control methods.
Describes the process and settings for the auto tuning function to automatically set PID constants.
Details how to perform step operations by changing SP, LSP, ramp, and PID group settings.
Shows the functional block diagram for digital inputs and internal contacts and their configuration.
Explains the functional block diagram for internal events and their output to control or event outputs.
Illustrates the functional block diagram for digital outputs and their configuration options.
Details the two types of current values provided for CT input and their functional block diagram.
Explains the position proportional control mechanism, including dead zone and motor adjustment.
Details the commands used for continuous data read/write and random data read/write operations.
Details the Modbus commands for reading and writing data, including send and response message structures.
Covers essential maintenance tasks such as cleaning, part replacement, and fuse replacement.
Lists alarm codes, failure names, causes, and corrective actions for troubleshooting.
Details the indications and alarms for PV input failures based on different sensor types.
Explains the indications and alarms for RSP input failures and their corresponding actions.
Provides critical cautions to ensure accurate calibration and prevent operational issues.
Outlines the procedures for calibrating I/O, PV input, RSP input, and CT input.
Details the steps for calibrating PV input for DC voltage, DC current, Thermocouple, and RTD types.
Describes the steps for calibrating CT input, including zero and span adjustments.
Details the calibration process for current and continuous voltage outputs, including zero and span settings.
Details the specifications for various PV input types including Thermocouple, RTD, DC voltage, and DC current.
Details the number of input points, input object, measurement limits, accuracy, and resolution for CT inputs.
Lists specifications for Relay output, Motor relay output, Voltage pulse output, Current output, Continuous voltage output, and Auxiliary output.
