13-6
Chapter 13.  SPECIFICATIONS
Environment conditions
 Standard conditions
Ambient temperature: 23±2 °C
Ambient humidity: 60±5 %RH
Power supply voltage: AC power model, 105 V AC±1 %, 50/60 Hz±1 Hz  
DC power model,  24 V AC±1 %, 50/60 Hz±1 Hz 
24 V DC±5 %
Vibration: 0 m/s
2
Shock: 0 m/s
2
Mounting angle: (Reference plane) ±3 °
 Operating conditions
Ambient temperature: 0 to 50 °C (0 to 40 °C for gang-mounting)
Ambient humidity: 10 to 90 %RH (non-condensing)
Rated power  
supply voltage:
 
AC power model, 100 to 240 V AC, 50/60 Hz 
DC power model, 24 V AC, 50/60 Hz or 24 V DC
Power supply voltage: AC power model, 85 to 264 V AC, 50/60 Hz±2 Hz 
DC power model, 21.6 to 26.4 V AC, 50/60±2 Hz or 21.6 to 26.4 V DC
Vibration: 0 to 2 m/s
2
 (10 to 60 Hz for 2 h in each of the X, Y, and Z-direction)
Shock: 0 to 10 m/s
2
Mounting angle: Reference plane (vertical) ±10 °
 Transportation conditions
Ambient temperature: -20 to +70 °C
Ambient humidity: 10 to 95 %RH  (non-condensing)
Other specifications
Power consumption: AC power model, Max. 12 VA 
DC power model, Max. 12 VA (24 V AC), Max. 8 W (24 V DC)
Insulation resistance: Between power supply terminal and secondary terminal, 500 V DC, 20 MΩ 
or more
Dielectric strength: AC power model, Between power supply terminal and secondary terminal, 
1500 V AC for 1 min. 
DC power model, Between power supply terminal and secondary terminal, 
500 V AC for 1 min.
Inrush current at  
power ON:
 
AC power model, Max. 20 A 
DC power model, Max. 20 A
Non-detected power 
failure time:
 
Max.20 ms (AC model) 
No power failure allowed (DC model)
Altitude: 2000 m or less
Mass:
C35   48 × 96  Approx. 250 g (including mounting bracket) 
C36   96 × 96  Approx. 300 g (including mounting bracket)
Terminal screw  
tightening torque:
 
0.4 to 0.6 N·m
Standards compliance: EN61010-1, 
EN61326-1 (For use in industrial locations) 
During EMC testing, the reading or output may fluctuate by ±10 %FS.
Over-voltage category: Category II (IEC60364-4-443, IEC60664-1)
Allowable pollution 
degree:
 
2
Console material: Polycarbonate
Case material/color: Reformed PPE/Light gray (DIC650)