-20-
4.3.5Timer Setting
Here you can set Timer, Event Timer and Sleep Timer.
a: Time Setting
The default time setup is auto, you can select
manual and input the by hand, select the time
zone according you country and you will get
the correct current time which is based on
TDT (Time and Data Table) in the stream of
the current channel service.
b: Event Timer
Here you can set your favorite channel to
begin broadcasting at future time you set,
including both TV and Radio, you can add,
edit and delete the event you set.
c: Sleep Timer
Here you can set Sleep timer and this will
enable receiver to sleep automatically
according to the time you set.
To Next Page
Loading...
