7. Take the upper deadzone and lower it to ~120. Make sure the
thumbstick makes perfect circle at the edge when moved around.
If not, then lower the deadzone even more.
5.3. INTERFACE OVERVIEW
There are 2 profile types available - on-board and software.
On-board profiles are saved in the device memory (so you can use the
keypad on other PC or consoles and it will work with the saved
settings). If you are using only on-board profiles, then Azeron software
doesn’t need to be opened while gaming, it is used just to setup
buttons. If you are using software profiles, then the Azeron software
needs to run in the background while playing the game.
Note! Macros and Layering features will not work in the on-board memory
To Next Page
Loading...