using too small values for delays and keypresses, otherwise it may not
register). It is also possible to turn on a repeat for the macro while the
button is held down.
Macro function is available only in software profiles! Currently it is not possible to save
Macro in on-board memory due to the PCB limitations.
We are planning to add more advanced macro functionality in future software
updates.
5.4.12. No action mode
Right click on the button to delete any keybind on it and make it “empty”
and do nothing. Or press “Unbind All” at the top to remove all keybinds
and labels in current profile.
To Next Page
Loading...