Calling from the Call log
Scroll to the number in the Call Log, and by pressing the Call button (1), the number will be
dialed automatically.
Erasing a number from the Call list
Scroll through the Call list until the desired number is shown on the display.
Press the Menu/OK key (4) and then use the left or right button to select “Delete”,
Then press Menu/OK key (4) to erase the number.
Erasing all numbers from the Call list
Scroll through the Call list until the desired number is shown on the display.Press the Menu/OK
key (4) and then use the left or right button to select “Delete All”, Then press Menu/OK key
(4) to erase all the numbers.
Note: Only those read numbers from the call log will be erased using this function.
Store a number from the call log into the phonebook
Scroll through the Call list until the desired number is shown on the display. Press the
Menu/OK key (4) and then use the left or right button to select “SAVE to PB”, Press Menu/OK
key (4) again.The last character of the current name will be blinking and you can begin edit
the name. Press Menu/OK key (4) to save the name.The last digit of the telephone number
will blink and you can begin edit the telephone number.Press OK (4) again to confirm and you
will be bring back to the call list.
Date Time setting
Press Menu button (4). Use the Left and Right button to scroll to ‘DATE TIME’ and press OK
(4). Enter the Year and press OK (4). Enter the Month and press OK (4). Enter the Date and
press OK (4). Enter the Hours and press OK (4). Enter the Minute and press OK (4)
Register/de-register a handset
Register to a DECT base
Your phone is supplied with the handset already registered to the base unit, and you shouldn't
need to register it. But if you've bought extra handsets separately, you'll need to register each
one to your original base unit. Maximum 5 handsets can be registered to one base.
To Next Page
Loading...