Internal call (intercom)
To make an intercom call
Press the INT button
Key in the number of the other handset
On the other handset's display, your number appears, and the INT symbol flashes. Then the
other handset user presses the CALL button to connect the call.
For details of how to change the ringing melody and volume for intercom calls, see "INT
MELODY" and "INT VOLUME" on "HANDSET SETTING" part.
To end an intercom call
Press the CALL button on your handset
The other person will hear Busy tone, and should also press the CALL button to hang up.
Reset of the handset
Warning: If you reset the system, you will lose all stored information (including numbers in
memory) and all features will return to their default settings.
If you reset the system, you will lose all stored information (including numbers in memory)
and all features will return to their default settings. You need to register the handset to the
base unit again.
While you are resetting the system, you should disconnect the telephone line cord from the
back of the base unit, so you won't be interrupted by incoming calls.
Press Menu button (4) Use the Left and Right button to scroll to ‘HANDSET’ and press OK (4)
Use the Left and Right button to scroll to ‘RESET’ and press OK (4)
Enter the pin code (0000) and press OK (4).
To Next Page
Loading...
Need help?
General