To register a handset
Press the MENU button, then press LEFT and RIGHT button to the location
REGISTER
Press the OK button, then press LEFT and RIGHT button to the location
BASE 1
Press the OK button again
The display shows Enter Pin? Key in pin by default is “0000” and press OK to confirm.
Once the screen shows “Press Base” together with a blinking wireless icon immediately
power off/on the base station.
You will hear a beep sound from the handset and the screen will show the name “Aztech”
together with a number.
Removing a handset
You can remove a handset from a base to allow another handset to be registered: Press Menu
button (4). Use the Left and Right button to scroll to ‘DE-REGISTER’ and press OK (4). Enter
the pin code (0000) and press OK (4). Enter the handset number (1-5) you want to remove
and press OK (4). If handset deregistered is not successful; it will ask again to enter the
handset number.
Call transfer and Intercom between two handsets
Call transfer and conference call during an external call
To transfer the outside call to another handset
(if you have two or more handsets):
Press the INT button for 2 seconds and key in the number of the other handset.
The outside call is put on hold. When the other handset answers, you can speak to the user. If
the other handset does not answer, you can get back to the outside call by pressing the INT
button again.
To Next Page
Loading...
Need help?
General