To Next Page

To Previous Page

Page 9 of

Answering an Incoming calls

To answer an incoming call, press the Call button (1).

Setting the volume

During a conversation you can set the volume by pressing the Volume button (6). You can set

the volume alternatively in between 1-5. You can also use the left/right button to do so.

Handset Setting

Setting the ring volume and melody

You can customized the ringer melody for an incoming call (external) and Intercom call

(internal)

Handset melody

Press Menu button (4). Use the Left or Right button to scroll to ‘HANDSET’ and press OK (4).

Use the Left or Right button to scroll to ‘RING TONE’ and press OK (4).Use the Left or Right

button to scroll to ‘EXTERNAL’ or ‘INTERNAL’ and press OK (4).Select the melody you want,

and then press OK (4).

Or the external call melody can be set as follows:

Press and hold the melody button (6) until the current melody is heard. Select the desired

melody (1-9) by means of the Left or Right keys. Press melody button (6) again to confirm the

setting.

Handset ring volume

Press Menu button (4) Use the Left or Right button to scroll to ‘HANDSET’ and press OK

(4).Use the Left or Right button to scroll to ‘RING TONE’ and press OK (4).Use the Left or

Right button to scroll to ‘VOLUME’ and press OK (4).Select the volume level you want, and

then press OK (4).

Press the volume button (6) in standby. The handset will ring in the current volume. Use the

Left or Right keys to select the desired volume (0-5). Press the volume button (6) again to

confirm the setting.

Note: When the volume is set to 0, the handset will not ring when there is an incoming call

and the display will show

Aztech E310 User Manual

Other manuals for Aztech E310