HW831 User Guide Rev 1.0
18
This list displays the summary of Internet access policies. There are a total of eight
policies and at any one time, only one policy could be enabled.
To enable/disable a policy, check/uncheck the “Enable” checkbox of that policy.
To edit a policy, select the policy and click on the “Edit” button.
Edit Internet Access Policy
Policy Name: Enter a name in this field to identify the policy. A maximum of 25
characters can be entered.
Enable: To enable this policy, check the “Enable” checkbox.
Internet Access: Select “Allow” if you want all computers on your network to have
Internet access except those listed in the “Control by MAC Address” and “Control
by IP Address” sections. Select “Deny” if you do not want any computers on your
network to have Internet access except those listed in the “Control by MAC
Address” and “Control by IP Address” sections.
Control by MAC Address
To Next Page
Loading...
