HW831 User Guide Rev 1.0
17
Application: Enter a name in this field to identify this port forwarding record. A
maximum of 25 characters can be entered.
Enable: To enable this port forwarding record, check the “Enable” checkbox.
Port: Enter the port range to forward. The left field is the Start Port while the right
field is the End Port. If you want to forward only a single port, enter the same port
number in both the Start Port and End Port fields, or enter the port number in the
Start Port field and leave the End Port field empty.
Protocol: Select the protocol for this port forwarding record. The options are
“TCP”, “UDP” or “BOTH”.
Private IP Address: Enter the IP address of the computer on your local network to
which the ports will be forwarded.
To save the record, click on the “OK” button.
Edit Port Forwarding
Change the fields as required and click on the “OK” button to save the record.
4.3.2 Internet Access
4.3.2.1 Internet Access Policy Summary
To Next Page
Loading...
Need help?
General
