To Next Page

To Previous Page

ULT FREEZER – USER MANUEL

Updated 19. April 2021

Unfolded folders

4. Update Data

Guide how to update firmware in the Controller.

Note: Updating firmware or new parameter, will not delete the history in the memory of the Controller.

But we do recommend downloading important data from the Controller before updating firmware and

parameter.

Unpack the Drev_D.zip file and copy the contents of Drev D directory to the main directory of USB memory

stick.

Must be look like this when the files are unpacked.

If new parameter file is needed, this could as example look like this: B-ULT -85.BSP

Note: You are not able to open this kind of file.

Copy the file B-ULT -85.BSP into this folder.

NOW YOU ARE READY TO UPDATE THE CONTROLLER WITH NEW FIRMWARE.

Insert the USB stick in the USB port for the Controller port.

Here you should be able to see

if there is a USB stick connected.

If the USB stick are not detected, try to remove main power plug,

wait 10 seconds and connect main power plug again.

If there is still no USB stick detected or

the update is not working, try with another type of USB stick.

B SCIENCE B-ULT 100 User Manual

Questions and Answers: