8
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Accessories
After opening the box, check that the following accessories are included. If any item is missing or
damaged, contact your authorized retailer.
Included accessories
Note
z Foot controller: Model T
This foot controller can be used on this machine model BL137A.
z The securing screw on the side of the presser foot holder is available through your authorized retailer.
(Part code: 132730-122)
12.3.4.5.6.7.8.9.
10.
*
1
11. 12. 13. 14. 15. 16. 17. 18.
19
.
20. 21. 22. 23.
24.
25. 26. 27.
28. 29. 30. 31. 32.
*
1 75/11 2 needles, 90/14 2 needles , 90/14 2 needles: Ball point needle (gold colored)
No. Part Name Part Code No. Part Name Part Code
1 Buttonhole foot "A" XC2691-023 18 Spool cap (small) 130013-124
2 Overcasting foot "G" XC3098-031 19 Extra spool pin XE2241-001
3 Monogramming foot "N" XD0810-031 20 Spool net XA5523-020
4 Zipper foot "I" X59370-021 21 Foot controller XC8816-021
5 Zigzag foot "J" (on machine) XC3021-031 22 Scissors XC1807-121
6 Blind stitch foot "R" XC4051-031 23 Disc-shaped screwdriver XC1074-051
7 Button fitting foot "M" XE2137-001 24 Embroidery foot "Q" XD0474-151
8 Seam ripper X54243-051 25
Embroidery set (medium)
H 10 cm X W 10 cm
(H 4 inches X W 4 inches)
EF62:
Frame and embroidery sheet
9 Bobbin (4) X52800-120 26
Embroidery bobbin thread
(white)
BBT-W
10 Needle set X58358-021 27 Accessory bag XC4487-021
11 Twin needle X59296-121 28 Machine cover XE5402-001
12 Cleaning brush X59476-021 29 USB cable XD0745-051
13 Eyelet punch 135793-001 30
Instruction and Reference
Guide
XE5404-001
14 Screwdriver XC4237-021 31 Quick reference guide XE5405-001
15 Touch pen XE3069-001 32 Stabilizer 182986-024
16 Spool cap (large) 130012-024
17
Spool cap (medium) (on
machine)
XE1372-001
0711-0120-C-combo_E.book Page 8 Tuesday, August 26, 2008 2:43 PM
To Next Page
Loading...
