122
EMBROIDERY
Removing the embroidery foot
a
Press (Needle position button) once or
twice to raise the needle.
a Needle position button
b
Turn off the sewing machine.
CAUTION
c
Raise the presser foot lever.
a Presser foot lever
X The presser foot is raised.
d
While pressing in the lever at the back of the
embroidery foot with your finger, loosen the
presser foot holder screw, and then remove
embroidery foot "Q".
Turn the screwdriver toward the back.
a Screwdriver
e
Attach the presser foot holder.
• For details, refer to "Removing and attaching
the presser foot holder" (page 45).
z
Before removing the embroidery foot, be
sure to turn off the sewing machine.
Otherwise, injuries may occur if one of
the operation buttons is accidentally
pressed and the machine starts sewing.
a
a
a
0711-0120-C-combo_E.book Page 122 Tuesday, August 26, 2008 2:43 PM
To Next Page
Loading...
