SEWING BASICS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
56
■ Using the thread cutter
When sewing with nylon or metallic threads, or
other special threads, use the thread cutter on the
side of the machine to cut the threads.
a
When you wish to finish the stitching and the
sewing machine is stopped, press (Needle
position button) once to raise the needle.
a Needle position button
b
Raise the presser foot lever.
a Presser foot lever
c
Pull the fabric to the left side of the machine,
and then pass the threads through the thread
cutter to cut them.
a Thread cutter
a
a
a
0711-0120-C-combo_E.book Page 56 Tuesday, August 26, 2008 2:43 PM
To Next Page
Loading...
