LCD SCREEN
B-18
■ Utility Stitch Screen
Press a key with your finger to select the stitch pattern, to select a machine function, or to select an
operation indicated on the key. When the key display is light gray, the function is not currently available.
LCD SCREEN
• Only touch the screen with your finger or the included touch pen. Do not use a sharp pencil, screwdriver,
or other hard or sharp object. It is not necessary to press hard on the screen. Pressing too hard or using a
sharp object may damage the screen.
No. Display Key Name Explanation Page
a Needle position
setting display
Shows single or twin needle mode setting, and the needle stop
position.
–
Single needle/down
position
Single needle/up position
Twin needle/down
position
Twin needle/up position
b Selected stitch
display
Shows the name and code number of the selected stitch. S-3
c Presser foot display Shows the presser foot code. Attach the presser foot indicated in this
display before sewing.
B-45
d Stitch preview Shows a preview of the selected stitch. When shown at 100%, the
stitch appears in the screen at nearly its actual size.
S-21
e Pattern display size Shows the approximate size of the pattern selected.
: Nearly the same size as the sewn pattern
: 1/2 the size of the sewn pattern
: 1/4 the size of the sewn pattern
* The actual size of the sewn pattern may differ depending on the type
of fabric and thread that is used.
S-21
f Stitch selection
screen
Press the key for the pattern you want to sew. Use
to change to different stitch groups.
S-21
g Page display Shows additional pages that can be displayed. (Illustration shows page
1 of 3.)
–
To Next Page
Loading...
Need help?
General
